Measuring functions

• Banana socket outputs for connection to a 3-phase installation tester.
• Voltage indicators on EVSE output.
• Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection.
• Control Pilot resistance selector for simulation of electric vehicle status.
• Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE).
• Type 2 Male Plug connector for connection to EVSE.
• 6 mA EV RCD support.
• Functional tests support*.
  EVSE AUTO SEQUENCE® support*.
• MESM report creation**.
• Basic support:
• A 1532
• Partial support:
• 6 mA EV RCD
• EVSE report**
• Full support:
• Functional test support
• EVSE AUTO SEQUENCE® support

Technical data

• Dimensions (w x h x l): 200 x 100 x 70 mm
• Mass (without accessories): 0.82 kg

MI 3152 EurotestXC

Measuring functions

• Insulation resistance with DC voltage from 50 V to 1000 V;
• Varistor test;
• Continuity of PE conductors with 200 mA DC test current with polarity change;
• Continuity of PE conductors with 7 mA test current without RCD tripping;
• Line/Loop impedance combined also in one function Z AUTO;
• Loop impedance with Trip Lock RCD function;
• TRMS voltage and frequency measurements;
• Phase sequence;
• Power and THD measurement (up to the 12th harmonic);
• RCD testing (general and selective, type AC, A, F, B, B+, MI RCD, EV RCD, PRCD, PRCD-K, PRCD-S);
• Earth resistance (3-wire and 2-clamps method);
• Specific earth resistance with Ro-adapter (option);
• TRMS leakage and load currents (option);
• First fault leakage current (ISFL);
• Testing of Insulation Monitoring Devices (IMDs);
• Illumination (option);
• High resolution Loop impendance (mΩ) (option);
• EVSE AUTO SEQUENCEs and function inspections;
• Determining location of cables (option);
• QR and/or barcode scanner support (option).

Key features

• Predefined Automatic tests:
  - Auto TT (U, Zln, Zs, Uc);
  - Auto TN/RCD (U, Zln, Zs, Rpe);
  - Auto TN (U, Zln, Zlpe, Rpe);
  - Auto IT (U, Zln, Isc, Isfl, IMD).
• Built-in help screens for referencing on site.
• Built-in fuse tables for automatic evaluation of the line / loop impedance result.
• Monitoring of all 3 voltages in real-time.
• Automatic polarity reversal on continuity test.
• Automated RCD testing procedure.
• Built-in charger and rechargeable batteries as standard accessory.
• BT communication with PC, Android tablets and smart phones via built-in BT.
• PC SW Metrel ES Manager for creation of test structures and uploading, downloading of test results and report creation.
• Support for aMESM Android APP, data management tool (option).

Technical data

• Dimensions (w x h x l): 230 x 103 x 115 mm.
• Mass (without accessories): 1.3 kg.