EV Kit 5 (MI 3155 Standard Set & A 1532 EVSE Adapter)

EVSE (Electric Vehicle Supply Equipment) adapter is a special accessory intended for testing Mode 3 EV supply equipment with a type 2 connector. MI 3155 EurotestXD is the newest flagship of Metrel’s most advanced line of multi-functional measuring instruments and is designed specifically for testing in industry. What differentiates this instrument from the rest is its ergonomic design and an intuitive user interface, encompassing a memory organizer and fully programmable AUTO SEQUENCEs, managed through a large colour touch screen display.
Manufacturer: Metrel
£2,768.00 incl VAT
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

EVSE (Electric Vehicle Supply Equipment) adapter

Measuring functions

  • Banana socket outputs for connection to a 3-phase installation tester.
  • Voltage indicators on EVSE output.
  • Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection.
  • Control Pilot resistance selector for simulation of electric vehicle status.
  • Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE).
  • Type 2 Male Plug connector for connection to EVSE.
  • 6 mA EV RCD support.
  • Functional tests support*.
    EVSE AUTO SEQUENCE® support*.
  • MESM report creation**.
  • Basic support:
  • A 1532
  • Partial support:
  • 6 mA EV RCD
  • EVSE report**
  • Full support:
  • Functional test support
  • EVSE AUTO SEQUENCE® support

Technical data

  • Dimensions (w x h x l): 200 x 100 x 70 mm
  • Mass (without accessories): 0.82 kg
MI 3155 EurotestXD

Measuring functions

  • Live Transformer’s Impedance Measurement with Four Wire Test;
  • Hi-precision Short Circuit Current evaluation with Calculated Hot factor;
  • 3-wire test of PE (RPE function) without extension lead conductor;
  • Autotest insulation function between L-N, N-PE and L-PE (R ISO ALL function);
  • 4 wire continuity test;
  • Insulation resistance with DC voltage from 50 V to 2500 V and PI, DAR calculation;
  • Varistor test;
  • Continuity of PE conductors with 200 mA DC test current with polarity change;
  • Continuity of PE conductors with 7 mA test current without RCD tripping;
  • 2-wire and 3-wire loop impedance (L-PE) measurement with Trip Lock RCD function;
  • Touch voltage / Contact voltage measurement with external P/S probe.
  • 2-wire and 3-wire line impedance (L-L, L-N) measurement;
  • 1-phase / 3-phase TRMS voltage and frequency measurements;
  • Line, loop and RCD measurements at frequency range 16 ... 400 Hz;
  • Phase sequence;
  • Power and THD measurement (up to the 12th harmonic);
  • RCD testing (general and selective, type AC, A, F, B, B+, MI RCD, EV RCD, PRCD, PRCD-K, PRCD-S);
  • Earth resistance (3-wire and 2-clamps method);
  • Specific earth resistance with Ro-adapter (option);
  • TRMS leakage and load currents (option);
  • First fault leakage current (ISFL);
  • Testing of Insulation Monitoring Devices (IMDs);
  • Machine mode support with time discharge;
  • Illumination (option);
  • High resolution Loop impendance (mΩ) (option);
  • EVSE (Electrical Vehicle Supply Equipment) support (option);
  • Determining location of cables (option);
  • QR and/or barcode scanner support (option).

Key features

  • Programmable AUTO SEQUENCEs.
  • Predefined profile dependent AUTO SEQUENCEs.
  • Predefined Automatic tests:
    - Auto TT (U, Zln, Zs, Uc);
    - Auto TN/RCD (U, Zln, Zs, Rpe);
    - Auto TN (U, Zln, Zlpe, Rpe);
    - Auto IT (U, Zln, Isc, Isfl, IMD).
  • Functional inspections.
  • Visual inspections.
  • Custom inspections (visual and functional) which may be incorporated into AUTO SEQUENCEs.
  • EVSE AUTO SEQUENCEs and function inspections.
  • Machine functional and visual inspections.
  • Built-in help screens for referencing on site.
  • Built-in fuse tables for automatic evaluation of the line / loop impedance result.
  • Monitoring of all 3 voltages in real-time.
  • Automatic polarity reversal on continuity test.
  • Automated RCD testing procedure (RCD AUTO).
  • Automated Impedance testing procedure (Z AUTO).
  • Measurement filtering according to the selected area group.
  • Built-in charger and rechargeable batteries as standard accessory.
  • BT communication with PC, Android tablets and smart phones via built-in BT.

Software

  • PC SW Metrel ES Manager (structure and report creation, data upload/download).
  • Optional aMESM Android APP (structure and report creation, data upload/download).

Technical data

  • Dimensions (w x h x l): 252 x 111 x 165 mm.
  • Mass (without accessories): 1.78 kg.

MI3155 Standard Set

  • Instrument MI 3155 EurotestXD
  • 4400 mAh battery pack
  • Power supply adapter 12V/3A
  • Tip commander + 2 x bat. AAA
  • Mains plug cable 1,5 m
  • Test lead green 1,5 m
  • Test lead, 4-wire, 1,5 m
  • Test lead, 3-wire, 1,5 m
  • Test lead, 2-wire, 2,5 kV, 1.5 m
  • Test probe, 6 pcs (black, brown, blue, green-2, red)
  • Crocodile clip, 7 pcs (black-2, brown, blue, green, red-2)
  • Earth set, 3-wire 20 m
  • USB cable
  • Soft carrying bag
  • Soft carrying neck belt
  • Metrel ES Manager BASIC license*
  • Short instruction manual
  • Instruction manual (CD)
  • Guide for testing and verification of Low voltage installations (CD)
  • Calibration certificate
  • Metrel ES Manager (program installation) A 1481 (CD)

*Metrel ES Manager can be downloaded free of charge from Metrel Web server.